News

At the international HVAC-exhibition MCE in Milano at the end of March, ESBE launches Solar Kit Premium VMD300. These are smart combination products with dual functions for tap water applications, such as solar and gas heating. With a fully adjustable diverting temperature between 40 and 50 degrees and highest regulating mixing accuracy, the Solar Kit Premium gives the highest comfort and energy savings in the market.

In the Mediterranean countries Solar heating in combination with Gas boiler is commonly used. ESBE now takes another big step into this market by launching the big sister to ESBE Solar Kit Basic, namely Solar Kit Premium.

Product Manager Per Thunberg explains, “ When solar heating is not enough to heat the domestic hot water a backup solution, such as a gas boiler, is necessary. The Solar Kit diverts and optimizes the incoming water when additional heating is needed, and makes the outgoing water scald safe, all in one easy-to-install Solar kit.”

 PRESS RELEASE ESBE VMD300 20120503 GB.pdf

NEW! ESBE LTC200
During the two fairs; Nordbygg in Sweden and MCE in Milano in March, ESBE launches LTC200. A smart load unit with an integrated energy-efficient A-class pump, which fulfills the important European Eco-Design Directive (2009/125/EC),for ErP, taking effect on August 1, 2015.

“As part of our mission and belief it is important to stay ahead and move forward to more energy-efficient solutions as soon as these become available. Compare to our popular pioneer LTC100, the new LTC200 consumes up to 70% less electricity, hereby reducing the impact on the environment as well as the electricity bill for the house-owner” says Product Manager Per Thunberg.

 PRESS RELEASE ESBE LTC200 GB 20120316.pdf

This Spring you are able to meet ESBE at ten bigger fairs in totally eight countries. With the investment in a new stand layout we hope that our customers will feel even more at home with us regardless in which country you meet us. The new stand is influenced by the famous Scandinavian design, enhancing our Swedish enheritage since the start in 1906 in combination with the active and professional installer. Our focus is always highest comfort, safety and energy savings for our customers.

FAIRS SPRING 2012
Aquatherm, Wienna 24.01-27.01.12
Interclima, Paris 07.02-10.02.12
Aqua-Therm, Moscow 07.02-10.02.12
Energisparmesse, Wels 29.02-04.03.12
SHK, Essen 07.03-10.03.12
Nordbygg, Stockholm 20.03-23.03.12
MCE, Milano 27.03-30.03.12
IFH, Nürnberg 18.04-21.04.12
Instalacje, Poznan 23.04-26.04.12
ISK-Sodex, Istanbul 02.05-05.05.12

 PRESS RELEASE Fairs Spring 2012_GB.pdf

As of 2012 ESBE extends its product range with insulation. As one of the first mixing valve manufacturers, ESBE launches a complete assortment of insulation shells to cover the popular valves VRG and VRB (DN15-40).

The ESBE insulation shells are developed according to the German directive EnEV2009 and reduce heat losses with 65% compare to an uninsulated system. The insulation shells fit perfectly to the ESBE valves series VRG and VRB. The shell is designed with a very tight seal to prevent air-circulation, hereby gaining important energy savings.

 ESBE Insulation shell EN 20120101_A.pdf

ESBE Group is the market leader of products that help installers provide property owners in Europe with the market’s most resource-saving products and solutions for regulating heating and cooling in hydronic systems. Fresh from the printer is our new catalogue 2012/2013. In all, 200 pages of interesting product information, available in 15 languages.

 ESBE New Catalogue 2012_1013 EN 20111020.pdf

Since the launch of our first Solid Fuel products in the market we have constantly strived to improve and complement our strong product line to become even more energy efficient, easy to use for the installer and safe. Last year’s additions; the Draught regulator ATA200 and Flue gas thermostat CTF150 are now joined by the NEW! Thermal safety valve VST112.

 PRESS RELEASE ESBE VST112 EN 20111020_B.pdf

ESBE is using YouTube to promote its new installation video. From September ESBE is promoting its new video on YouTube showing how to install its CRB100 products, thereby making it accessible to everyone. The video features as part of the new campaign called “Fast in, Fast out. Job well done.”.

 Press relase ESBE Campaign Sept 2011_GB.pdf

ESBE Hydronic Selection
– product dimensioning and selection Software.

ESBE is the market leader in helping installers provide property owners in Europe with safe and energy saving products for regulation of heating and cooling in hydronic systems. ESBE has one of the markets widest ranges of valves, actuators and controllers and the ESBE Hydronic Selection software provides easy access to all these products. It simply provides the user with an easy-to-use and intelligent tool to select the right product in the right dimension, and for the right application. The software is available on the Esbe.eu as free download September 1.

 PRESS RELEASE ESBE Hydronic Selection GB.pdf

We are happy to provide our customers and wholesalers in Poland with a completely new Polish website. ESBE established the sales office in Poznań in the beginning of the year in order to be closer to the market and be able to support the customers better than before. And according to one of our core values – long term thinking – we are here to stay!

The ESBE company opened up its doors in Poznań in January 2011. Headed by Country Manager Magdalena Dobrzaniecka and a team of 9 ambitious employees the focus is clearly on one thing and one thing only! To build the ESBE brand in Poland - and give comfort, safety and energy savings to the Polish house-owners.

Our stock is situated just outside Poznań and ensures a fast and secure delivery within 2-3 days from order. Please do not hesitate to contact us:

ESBE HYDRONIC SYSTEMS Sp. z o. o. Ul. Garbary 56, 61-758 Poznań
Tel. 61 851 07 28 Fax. 61 858 22 08, E-mail: info.pl @ esbe.eu

Reftele, 15 april 2011

ESBE Group is the market leader of products that help installers provide
property owners in Europe the market’s most resource-saving products and solutions for regulating heating and cooling in hydronic systems. The main focus and trend of today is to increase the use of renewable energy technologies in our carbon constraint world. ESBE takes yet another important and innovative step in the Solar energy arena to do just this.

 PRESS RELEASE ESBE Solar energy 20110313_GB.pdf

Reftele, Sweden, April 15, 2011

ESBE Group is the market leader of products that help installers provide property owners in Europe with the market’s most resource-saving products and solutions for regulating heating and cooling in hydronic systems. The main focus and trend of today is to increase the use of renewable energy technologies in our carbon constraint world. ESBE takes yet another important and innovative step in the Solid Fuel arena to do just this.

 PRESS RELEASE ESBE Solid Fuel 20110313_GB.pdf

Reftele, Sweden, April 15, 2011

ESBE supplies one of the widest assortments of controllers with integrated actuators including indoor and outdoor sensor controlled variants and constant temperature regulators. An ESBE controller reduces energy savings with up to 24% in comparison to manually operated valves. For the house owner this often means a pay-back time of about one year.

 PRESS RELEASE ESBE New Controllers 20110313_GB.pdf

The new ESBE VSB series safety valves are intended to protect against excess pressure in solar, tap water, and heating applications. The new range of safety valves encompasses 23 different items, all of which are certified according to current EN regulations.

The new version of ESBE's manifold series VMA is mainly improved with regard to enclosure measurements. Just as before, it is intended for use in tap water systems. The new manifold series VMA and the new safety valve series VSB also support the valve manifold VMB400, which is mounted with a direct connection to the boiler or water heater for a non-scalding function in the tap water system.

 VSB100_GB_B_LowRes.pdf

 VSB200_GB_B_LowRes.pdf

 VSB300_GB_B_LowRes.pdf

 VMA200_GB_C_LowRes.pdf

 VMB400_GB_B_LowRes.pdf

 ESBE Pressrelease_ VSB VMA VMB_GB verA.pdf

ESBE's range of thermostatic mixing valves is greatly broadened with the new VTA500 and VTS500 series. The completely new VTS500 series is specifically developed for solar heating systems with the aim of accommodating the temperatures demanded by such applications.

The new VTA500 series is intended for universal use in applications from tap water systems to floor heating systems. Common to all products in the new series is a higher flow capacity than ESBEs smaller valve series VTA300, now with a Kvs-value of up to 3.5 for the tap water items and up to 4.8 for the floor heating items. In addition, there are a number of new coupling connectors and temperature ranges to choose from. A total of 90 new items have been added to the range of ESBE thermostatic mixing valves.

 VTS520_VTS550_GB_B_LowRes.pdf

 VTA530_VTA560_GB_B_LowRes.pdf

 VTA520_VTA550_GB_B_LowRes.pdf

 VTA570_GB_C_LowRes.pdf

 ESBE Press release_ VTS VTA500_GB verA.pdf

Simple, compact installation, a broad range, optimal regulation and reliable, safe operation. ESBE's new load units and load valves have unique qualities to allow the best possible energy efficiency and environmentally friendly solid fuel firing.

With the increased interest in solid fuels as a good energy source customers and consumers are making new requests and demands. ESBE has taken this on board in its work on developing the entirely new product range designed for optimal loading of accumulation tanks, from the smallest pellet stoves up to 150 kW boilers. These products are now available from wholesalers in Sweden.

 ESBE Pressrelease_Solid fuel_GB_utgA.pdf

Simpler and more compact installation, larger range, minimal leakage and even better regulating precision for more and new areas of application. These are just a few of the many features the new generation of mixing valves and actuators has to offer.
Prior to the launch, interest in the new generation of mixing valves and actuators was enormous. During the development process, ESBE interviewed installation engineers, OEM partners and wholesalers throughout Europe to find out what their wishes and requirements were.

Lower energy consumption.
Our mixing valves already had a low level of internal leakage - thanks to our own patent from 2003. Now we've succeeded in bringing the leak rate down even further. From 0.1 to 0.05 percent of the flow. And this under double pressure, i.e., at 100 kPa (1.0 bar).

Higher regulating precision.
More stable mounting between valve and actuator results in higher regulating precision. Unstable mounting - where there is movement in the actuator - is, of course, the cause of impaired adjustment. The actuator has to *parry* even the smallest movements. This results in wobbly adjustment causing comfort and power consumption to suffer: excessive fluctuations of temperature and unnecessary surplus heat. With four *towers* instead of one round the spindle between valve and actuator, the resulting assembly has greater stability and adjustment is smoother.

More new features.
· Quicker and easier assembly of actuator and valves. More smart solutions resulting in fewer stages in the operation and the need for fewer tools.
· All valves (from DN15 to 50) are now made of the corrosion-resistant material DZR.
· 15 mm more compact motorized valve (valve with assembled actuator). A huge advantage particularly when you want to integrate the valve and actuator into heat pumps, boilers, pump groups or other finished products.
· New features and the use of brass throughout the range offer completely new areas of application, for example:
- systems with large temperature differences
- fancoils where a high degree of precision is required
- systems with independent, controlled circuits that require a low degree of valve leakage,
for example combined radiator and underfloor heating circuits
- comfort cooling where the secondary circuit requires a constant, circulating flow
- solar heating, gas/oil - systems with external temperature dependent adjustment
- solar heating and other systems with double accumulator tanks, etc.

Bigger range than ever.
We have expanded our range of mixing valves and actuators by more than 20 per cent:
· The new range includes an all new 3-way variant of change over valve DN 15 - 50 which,
in combination with a new actuator (15 seconds running time), opens up many more areas of application.
· The range of ESBE's unique BIV valves has been extended to DN 15 - 50.
· Expanded range of actuators offering a total of 34 different standard variants to choose from.
· Increased number of valve variants in both 3 and 4-way designs. All produced in brass, DN 15 - 50 (formerly DN 15 - 32).

 ESBE NGR Pressrelease_no2_GB_utgA.pdf